Ideal Scooter and Wheelchair Carrier
* Designed To Fit Virtually Any Vehicle, Car, Truck, Van Or Suv
The Craftsmen (2) In (1) 550 Carrier’s loading ramp is 28 1/4″ wide by 60″ long providing a gradual slope for easy loading of your scooter or wheelchair. A solid position handle on the ramp allows for easy folding and unfolding and tie down straps are included with rubber coated hooks which can be hooked onto any of the 10 tie down holes featured on the 4 1/4″ tall ramp sides. The ramp is easily attached even after the carrier has been attached to the vehicle making the installation very easy. The rear of the carrier has 2 reflectors for greater visibility at night.
The Craftsmen (2) In (1) 550 Carrier wheelchair and scooter carrier features a 2 section ramp that folds up and out into 3 different positions. The first position keeps the ramp folded flat to the carrier surface and held down with a spring pull pin. The folded flat position is to keep the ramp self-stored and secured when the carrier is folded up. The second ramp position allows the ramp to stand upright when a scooter or wheelchair is on the carrier. The ramp is held vertically in place with a spring pull pin. The last position is the ramp unfolded. This position allows for scooters or power wheelchairs to be pushed or driven up the ramp. Please Note: Your Scooter or Wheelchair must be unoccupied when loading the Craftsmen (2) In (1) 550 Carrier.
The Craftsmen (2) In (1) 550 Carrier folds easily with a simple pull of a hitch pin and unlike most can be parked with the simple pull of hand plunger. This feature allow you to save space when parking in carports, garages, or parking lots! The Craftsmen (2) In (1) 550 Carrier has a heavy-duty weight capacity of 550 Pounds and is constructed of a high-grade steel with a superior powder coat finish to protect it from the elements.
The photo directly above shows the simple action of the pull handle positioned in an easy location allowing the Craftsmen (2) In (1) 550 Carrier to simply fold upright flush against the vehicle as shown in the photo of the rear end of a pickup truck above.
The above photo shows the gear and plunger. This is the key that makes the Craftsmen (2) In (1) 550 Carrier so simple to use. The gear & plunger provides an easy, smooth lift when folding it flat against the vehicle. This plunger also removes any space, gaps and play that most all other carriers and trailers normally experience.
The Craftsmen (2) In (1) 550 Carrier is equipped with spring loaded quick locking pin lock’s for locking the loading ramp into its three different positions. The surface of the Craftsmen (2) In (1) 550 Carrier is a heavy-duty steel mesh with 1″ square support tubes underneath that will not bend or flex under the weight of your scooter or wheelchair. The Craftsmen (2) In (1) 550 Carrier is built with the highest quality material resulting in the highest quality carrier for hauling your expensive mobility scooter/wheelchair.
The Craftsmen (2) In (1) 550 Carrier is made from a strong lightweight alloy and has a durable exterior finish that resists scratches and corrosion. This structure also offers an amazing 550-pound weight capacity, that is more than five times the weight of the Craftsmen (2) In (1) 550 Carrier.
You also receive (Set Of Four) Quick Set Ratchet Tie Downs Free with your order:
The Craftsmen (2) In (1) 550 comes standard with A (Set Of Four) Quick Set Ratchet Tie Downs that have a capacity of 2,000 Pounds. The Quick Ratchet Feature allows you to secure your scooter/wheelchair in just seconds. There is also an instant quick release lever that removes all tension instantly when you are ready to use or remove your scooter/wheelchair off the Craftsmen (2) In (1) 550.
All Weather Heavy Duty Durable Nylon Cover included FREE with your Craftsmen 2in1 550:
|Length||51″ Need The Extra Large Craftsmen? Click Here.|
|Lifting Capacity||550 lbs.|
|Max. scooter width||28.”|
|Max. scooter wheelbase||44″|
|Installed weight||85 lbs.|
|Hitch Height (range)||5″ – 19″|
|Hitch Class||II or III|
Supporting the carrier is the heavy duty 2″ hitch tube which features 4 bolts and a safety pin underneath to allow the hitch tube to be removed from the carrier. The hitch tube has a 5/8″ hitch pin hole for securing the carrier to your vehicle and will work on class I, II, III, or IV hitches. A bolt fitted underneath the folding hitch tube allows you to level the carrier so that the pin holes line up to secure the carrier in the unfolded position. The distance between the hitch pin hole and the carrier is 13 7/8″ unfolded and when the carrier is folded the distance is 4 3/4″.
60 in. center folding ramp
Ramp folds up and down easily
Ramp folds flat position when not in use
Ramp can be removed
Carrier tilts up when not in use
Includes both class II and class III hitch
14 slots for tie down straps
Tough powder coat finish
Tray 49 1/8 in. x 28 1/8 in. of carrying area
The Craftsmen (2) In (1) 550 Carrier is easy to use and flexible. Most all Lifts, Carriers and Ramps are limited to the class of hitch it was meant to attach to. The Craftsmen (2) In (1) 550 Carrier Allows you the flexibility to attach to any and all hitch’s. Class II Or A Class III hitch. This now allows users to move the carrier from one vehicle to another freely without the concern of compatibility.